• Professional Paint Brush
• Multifunctional Wall Paint Roller Brush Tool Set
• Wall Paint Roller Brush Design
• Wall Paint Brush Roller Price

Paint roller covers achieve outstanding results when they have been manufactured from superb quality materials. You need roller covers and brushes that increase quality and productivity and minimize the time it takes to achieve professional results. At Pro Roller Company, Inc., we offer the paint brushes and rollers covers you need in order to complete a wide range of projects.

Wooster Golden Flo Roller Cover. (Image credit: Amazon.ca) Price: $8.52. This pack of 20 roller covers would be great to keep on hand for tackling small paint projects around the house—ouching up walls, painting baseboards or trim, or smoothing stain over furniture. Brush ends are rounded for a smooth, gradual paint stroke. Trim: Trim brushes have a straight cut-line and are also used for painting trim and corners. They can also be used for larger areas. Some painters prefer a straight edge versus an angled cut. Trim brushes also have rounded ends. Wall: A wall brush is a larger brush with a straight cut-line. For oil-based coatings, we recommend the Valspar All Stain Brush. If you’re not sure, go with the Valspar Wall & Trim Brush, it’s a great all-arounder. If you’re opting for a roller, there’s a few different kinds of roller covers, so you’ll want to figure out which one is right for you. Always try to use a top-quality roller cover.

Below we provide some important information that can help you paint walls efficiently using roller brushes.

Roller Advice

It is important to use a roller cover that matches your specific application. For textured or rough wall surfaces, you may want to use a nap size of 1/2 to 3/4 inch. For a flat and low sheen-paints and medium textured surfaces, a 3/8 to 1/2 inch medium nap is advisable. Finally, for glossy paint and smooth surfaces, a 1/4 to 3/8 inch thin nap is the best option.

Place the roller cover in your paint tray and roll it until full coverage is achieved. Then, remove excess paint by rolling the roller cover over the upper, ridged portion of the tray. Start applying the roller cover to a wall in a corner of the room in order to blend the new paint with the already painted border. Apply in a “W” or “M” shape as you roll in order to prevent unattractive streaks. Fill in the blank areas from left to right until all untouched spaces are painted.

Other Suggestions for Using Paint Brushes and Rollers

Using an edging brush lightly covered in paint, proceed to smooth any remaining dots and specs on the wall. Paint at all times in the same direction to avoid the appearance of vertical and horizontal painting marks intersecting.

Choose paint brushes and roller covers made from high quality materials to ensure a professional appearance is left behind without small bristles remaining attached to the paint. A roller cover and paint brush of lower quality also will likely fail to provide sufficient coverage. In addition, if your painting job involves painting the ceiling, always start there first.

Apps & store. For information about our selection of roller covers and paint brushes to help you complete your painting projects, call us today at 800.325.9561 or leave us a message through our contact form. You may also check out our website for product information.

The quality of your tools can make or break the finished look of your paint job. Ahead, learn the key considerations involved in choosing the right roller frame and cover for your next project.

Professional Paint Brush

BobVila.com and its partners may earn a commission if you purchase a product through one of our links.

Photo: istockphoto.com

There are many do-it-yourself projects that allow for scrimping on costs without any negative effects on your results—painting, however, is not one of them. For a professional-looking paint job, you need to start with quality tools.

You’ll likely reach for a paintbrush when cutting in or painting trim, but covering the bulk of the wall or ceiling with paint becomes a much simpler, speedier job when you use a paint roller. Not only that, but the right roller-and-cover combination works to spreads paint smoothly and evenly, so you aren’t left with brushstrokes, patchy spots, or other imperfections.

Paint rollers and covers are simple and generally quite affordable tools, but there are many options to choose from. Ahead, our guide explains what to consider and what to look for, and it offers details on our top-favorite picks among the best paint roller and cover options available.

1. BEST ROLLER FRAME:Wooster Brush 9-Inch Roller Frame
2. BEST ROLLER COVER:Purdy Dove Cover
3. BEST VALUE ROLLER COVER:True Blue Professional Paint Roller Covers

Finding the Right Paint Roller for the Job

Multifunctional Wall Paint Roller Brush Tool Set

1. Select an easy-to-grip roller frame.

A roller frame—the skeleton of this reusable painting tool—is basically a comfortable plastic handle connected to a roller cage (the part of the frame that slips inside the roller cover). Typically, roller cages have plastic caps at either end supporting the compression metal “ribs” that fit inside a cover and hold it securely in place, but you’ll also find roller frames with sturdy plastic cages.

Roller frames are sold in sets with covers for convenience, but you have more control over the quality of your supplies when you purchase it separately. When comparing frames, look for these optional features:

• Ergonomic handle. If you expect to spend a lot of time painting, even just more than one room, it’s worth paying a little more for an ergonomic handle that is shaped to reduce strain on your wrist.
• Ball bearings. Quality roller frames have ball bearings to provide smooth rolling movement and a more perfect paint finish.
• Threaded handle. While it comes on most roller frames, do check for threads or clips at the bottom of the handle so you can attach an extension pole for tackling ceilings or the tops of walls.

Photo: istockphoto.com

2. Narrow down to your options for roller length.

Roller frames and covers come in several different lengths (and while most frames come in a fixed roller width, some of the large ones are adjustable in size, using small clips or prongs to secure the cover instead of a cage). You’ll need to match the lengths of your roller frame and cover if you want to do the job right.

• 9-inch rollers are the best size for the majority of projects tackled by DIYers. For starters, these paint rollers fit easily into a 5-gallon paint bucket. Plus, these are large enough to cover a good size swatch of wall in one roll yet not so long that they are difficult to control around trim and other details.
• 12-inch or longer rollers can be somewhat heavy and unwieldy and, therefore, are more often used by professionals than DIYers. If you really need to cover a stretch of wall in a hurry, however, you might want to choose one of these oversize rollers.
• 6- or 7-inch rollers are a good size for painting baseboard molding or small furnishings. These rollers are also useful for getting into corners or reaching behind the toilet to paint the wall.
• 4-inch mini rollers are great for touchups, small furnishings, tight spaces, or careful work around fixtures, windowsills, or other obstacles. They also come in handy for painting the insides of cabinets or bookcases.

3. Choose the right roller cover material based on your paint and project.

Covers come in five common material options, which vary in terms of what paint they work best with, how much they hold, and the texture they create.

• Wool or mohair roller covers, with natural fibers, are the best choices for applying oil-based paint, but they work well with any finish and cover a variety of surfaces smoothly. Wool picks up a lot of paint, and so provides excellent coverage with just one coat.
• Synthetic roller covers—including polyester, nylon, or Dacron—are the right choice for water-based latex paint because they resist matting. You can use a synthetic cover with any paint finish and on most surfaces. Though synthetics don’t pick up and hold as much paint as wool does, they are generally very durable.
• Roller covers that blend wool and polyester can be used with either type of paint and any paint finish, so are a great choice if you often switch between oil-based and water-based products. These versatile roller covers give the best of both worlds: They pick up a lot of paint and last a long time if cared for properly.
• Newer to the painting scene, microfiber roller covers (identifiable by the diagonal stripes on the plush cover) work with latex as well as oil-based paints with a matte, eggshell, or satin finish. These rollers provide a very smooth finish, almost as if sprayed on, and are suitable only on surfaces without much texture. However, there’s a bit of a learning curve to achieving an even finish with a microfiber roller because they pick up and release more paint than the average cover, so practice on cardboard or another throwaway surface before tackling your walls.
• Foam roller covers don’t last as long as the other options and, for that reason, are sometimes considered “single use” covers. They are best for rolling semi-gloss or high-gloss latex paint over smooth—not heavily textured—surfaces. Use them for quick touchups on trim, baseboards, furniture, or other small projects.

You’ll also want to consider the core of the roller cover; a good one is made from some type of resin or plastic. Cheap rollers have cardboard cores, which don’t hold well and often come apart after just a few uses.

4. Know what nap you need for your surface.

The nap of a roller cover refers to the length of its fibers—yet another important decision to make based on the project at hand. Different naps are good for different surfaces. As a general rule, the shorter the nap, the smoother the surface you’ll use it on. Using a long nap on a smooth surface tends to create a bumpy finish, while a short nap on a rough surface will often tear apart or shed fibers into the paint.

Wall Paint Roller Brush Design

• 1/4-inch nap is best for very smooth walls, ceilings, cabinetry, and other surfaces without texture, including metal.
• 3/8-inch nap is good for lightly textured surfaces, including most interior walls.
• 1/2-inch nap is a good length for moderately textured walls, paneling, and painted brick or concrete.
• 3/4-inch nap is best for heavily textured surfaces such as bare brick or concrete or textured interior walls like popcorn-textured ceilings.
• 1-inch nap and above is useful for painting stucco, cinder blocks, or rough brick.

Wall Paint Brush Roller Price

Our Top Picks